HAMMER DRIVER DRILL 18V BL1815

This 18v LXT SDS-PLUS Rotary Hammer is capable of drilling through steel, wood and masonry with ease. With the power of Lithium-Ion you can be sure to get the job done, wherever you are!

Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Conveniently located push button for forward and reverse.
High comfort grips.
One-touch sliding chuck for easy bit changes.
Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.
Triple operation mode: Rotary only, hammer only and rotary hammer.

Makita's FIRST 18VX2 Direct (36V) 1" Rotary Hammer
Hammer & Rotation / Hammer Only / Rotation Only Features Quick Change Drill Chuck
SDS-PLUS Shank
Variable Speed, Reversible
Accepts 2 x 18V Li-Ion batteries without a battery converter for use with existing 18V Li-Ion battery platform
Center of gravity located close to rear handle resulting in ideal tool balance during operation
Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
40 angle bit positions enable chisels to be positioned at optimum angle of operation
Rubber housing bumper protects mode selector switch and gear housing from damage
LED job light with afterglow feature
One touch sliding chuck enables quick and easy bit changes
Sliding rear handle for increased vibration absorption
Ergonomic soft rubber grip design for vibration absorption and comfortable operation

Model DHW180 is a pressure washer powered by an 18V LXT Li-Ion battery. This model is lightweight and easy to handle, providing sufficient cleaning power for light duty washing tasks and is convenient to use on work sites and home use
Feature and benefits;

Selectable from two power modes
5 in 1 nozzle
Self priming function

Motor delivers 1,900 SPM for faster and smooth cutting
Ideal for cutting sheet metal at thicknesses up to 16 gauge
Die holder rotates 360? to meet demands of cutting direction
Cutting radius: inner edge 45mm; outer edge 50mm
Anti-restart function for safety (with warning lamp).

Makita DJR185Z 18v Mini Reciprocating Saw Bare Unit is a versatile and powerful tool that's perfect for cutting through a variety of materials. Compact design and light weight construction, it's easy to manoeuvre and use in tight spaces.

Compact and lightweight design for easy maneuverability
Tool-less blade change system for quick and easy blade changes
Variable speed control dial for precise cutting in a variety of materials
Electric brake for maximum productivity
Battery & Charger Sold Separately

Experience a new class in cordless with 18V LXT Sub-Compact Brushless tool. Sub-Compact tools are the most compact and lightest weight in the 18V category, so users get 12V Max handling with the compatibility of the world's largest 18V system. The 18V Brushless Sub Compact Recipro Saw (DJR188Z) delivers high performance in a subcompact format making it perfect for tasks like cutting between studs or in pits.

20mm stroke with a cutting capacity of 255mm in wood
Compact and lightweight for increased maneuverability
High performance 3,000spm no load speed
XPT technology that protects against dust & moisture
One touch tool-less blade clamp

The Makita DJR189 is a Cordless Brushless Reciprocating Saw powered by 18v Makita LXT Lithium-Ion batteries. Equipped with a counterweight mechanism to reduce the tool vibration for lowering operator fatigue. The DJR189 features not only an electric brake but constant speed control as well as a variable speed control by trigger. This model has a compact, lightweight design and also has a redesigned blade clamp making blade removal much easier. Features & Benefits o High power and low vibration o Compact and lightweight design o Trigger lock function o LED worklight with pre-glow and afterglow function o Variable speed control by trigger o Electric brake o Constant speed control o Vibration absorbing system o Fixed type shoe, pivoting shoe plate o Brushless motor o One handed grip o Redesigned blade clamp making blade removal easier Specifications o Voltage: 18v o Battery Type: Makita LXT Lithium-Ion o Capacity in Wood: 255mm o Max Cut in Pipe: 130mm o Stroke per Minute: 0-3100spm o Stroke Length: 22mm o Noise Sound Pressure: 88dB(A) o Noise Sound Power: 99dB(A) o Noise K Factor: 3dB(A) o Vibration K Factor: 1.5m/sec2 Contents o Makita DJR189 18v LXT Cordless Brushless Reciprocating Saw o No Batteries o No Charger o No Case o Saw Blade.

MAKITA CORDLESS IMPACT DRIVER

The Makita DTD157Z is a cordless impact driver powered by 18V LXT Li-Ion battery.
Electric brake
Variable speed control by trigger
Forward / reverse rotation
LED job light
Ergonomically designed high comfort grip.
Anti bit-wobbling structure
Assist mode for controlled screwdriving
Brushless Motor
Electronic 2-speed impact power selection
Aluminium hammer case
Belt clip

Voltage: 18 v
Standard Bolt: M5-M14
High Tensile Bolt: M5-M12
Coarse thread (length): 22 - 90 mm
Max Fastening Torque: 140 Nm
Battery Type: Lithium-ion
Vibration: Fastening Bolt: 11.5 m/sec2
Vibration K factor: 1.5 m/sec2
Noise sound pressure: 95 dB(A)
Noise sound power: 106 dB(A)
Noise K factor: 3 dB(A)
Body only machine
Net weight: 1.2 - 1.5 kg
Battery Quantity (5.0ah): 2
Driving Shank: 6.35mm 1/4 " Hex
Blows per Minute (Hi) - ipm: 0 - 4,100 ipm
Blows per Minute (Lo) - ipm: 0 - 2,000 ipm
Machine Screw: M4 - M8
No Load Speed (Hi): 0 - 3,000 rpm
No Load Speed (Lo): 0 - 1,300 rpm

MAKITA COMBO KIT 18V